Flashmix Powder/Liquid Mixers

The Silverson Flashmix takes a revolutionary approach to powder/liquid mixing. Unlike many powder/liquid mixers, which use vacuum to pull in powders, the Flashmix literally forces powder into the liquid stream. This not only allows it to disperse and hydrate large volumes of powders, it means it can be used at higher temperatures and with higher viscosity mixes - offering the advantages of high shear mixing to a wide range of applications that were previously not possible.

Advantages

• Fast powder incorporation rates of up to 500 lbs/min
• Agglomerate-free, consistent product, time after time
• Suitable for operation at higher temperature
• Suitable for higher concentrations of gums and thickeners
• Minimum aeration
• Sanitary - the Flashmix is based on an EHEDG and 3-A Certified hygienic mixer
• Modular construction with a range of options to suit a wide range of applications and batch sizes
• Low power requirement; no additional pump required
• Low level, ergonomic design
• Simple - the Flashmix is easy to install, easy to operate and easy to clean

Materials of Construction

All product contact parts are in 316L stainless steel. The chassis is constructed from 304 stainless steel.

Motor Specifications

TEFC (Totally Enclosed Fan-Cooled) motors are available as standard. Other types of motor and enclosures are available as options.

Inlet and outlet connections

Tri-clamp fittings are standard. Other fittings on request.

Sealing

Sanitary single mechanical shaft sealing is standard. Double mechanical shaft seals are available.

Valves

Manual butterfly valves are standard. 

Cleaning

Designed for Cleaning-In-Place (CIP).

Hopper

Various hoppers are available according to model and application, including profiled hopper for minimal aeration.

Sack Table

A stainless steel sack table is available for FMX25 and 50.

Automation

As an optional extra the Flashmix can be supplied with pneumatic valves coupled to a powder sensor for semi-automatic processes.

FMX25

Capable of incorporating powders at rates of up to 40 lbs/min, the FMX25 is available with a 1.4 cu ft hopper as standard.

FMX50

The FMX50 can be supplied with a 1.4, 3.5 or 10.6 cu ft hopper, profiled for minimal aeration. Powder incorporation rates of up to 130 lbs/min are achievable.

FMX75

For bulk powder dispersion, the powerful FMX75 can incorporate powders at rates of up to 500 lbs/min. Available with a profiled 10.6 cu ft hopper.

Sack Table

A stainless steel sack table is available as an optional extra for models FMX25 & FMX50

FMX-CD

Designed for aggressive chemical service, the FMX-CD is generally configured to suit specific customer requirements. Double mechanical shaft seals and flange fittings are standard. Elastomers, valve and motor type can be specified to suit the application.

Silverson Vietnam

Mr. Viet 

0986817366