| 810-402 Multitest 1.0 dV Mk II |
| Materials Tester ; Mecmesin | UK |
| The
MultiTest-dV is a superior motorised force tester offering outstanding value.
Designed for precision-controlled compression and tension testing the
MultiTest-dV’s simple controls, backed by sophisticated electronics, make it
the ideal choice for basic materials testing. Simply fit a dedicated ELS loadcell and connect up to VectorPro MT software to use your MultiTest-dV as an entry-level materials tester. Use the power of VectorPro MT software to control your whole test sequence with simple, step-by-step programmes. Perform both standard calculations like peak, load at displacement and more complex calculations such as Youngs Modulus, and offset yield strength. |
| According with ASTM D882, ASTM D412, ASTM D3574, EN 10002-1, ISO 6892-1, … |
| Enhanced Load Sensors with excellent accuracy across the load range. |
| Active load holding and rate control (load ramping), plus active strain control. |
| Just four multifunction buttons for settings and operation. |
| Clear indication of load, displacement, speed and system status. |
| Rigid frame with minimal deflection, lightweight construction, integrated cable management. |
| Extensometer-ready for materials testing. |
| Key specs |
| * Displacement: |
| - Maximum displacement: 1000mm |
| - Accuracy: ±0.13mm per 300mm travel |
| - Resolution: 0.001mm |
| * Speed |
| - Range: 0.1 - 1200 mm/min |
| - Accuracy: ±0.2% of indicated speed |
| - Resolution: 0.1 mm/min |
| * Dimensions |
| - Crosshead travel: 1000 mm |
| - Throat depth: 70.5 mm |
| - H1510 x W290 x D414 mm |
| * Common specifications |
| - Voltage: 230 V AC 50 Hz |
| - Operating temperature: 10 - 35°C |
| - Humidity range: Normal industry and laboratory conditions, non-condensing |
| * Communications: |
| - Output of test results to PC/printer/datalogger: Yes, via USB |
| * Software VectorPro MT |
| Stress-Strain machine control and data analysis: test in both tensile and compressive directions by running to target load, position, stress, strain and break. |
| Universal tensile and compression testing capability for general product tests. |
| Permissions-based log-on with password protections to control who can create or run tests, view results, and produce reports. |
| FDA 21 CFR Part 11 audit trail available—event log records and supervisor e-signature authorisation for actions. |
| Instant pass/fail indication according to your specification criteria. |
| Touch screen enabled. |
| * CO (Certificate of Origin) & CQ (Certificate of Quality) |
| * Delivery/Installation & Construction at USM Factory |
| ACCESSORIES: |
| LOADCELL ; MECMESIN / UK |
| - The ELS range of interchangeable tension and compression loadcells is specially adapted to the OmniTest and MultiTest-dV range of Materials Testers. |
| - Each loadcell reads from zero to its full nominal capacity and is accurate to ±0.5% of reading from 5 - 100% of range. Class 0.5 according to ISO 7500-1 |
| - Each sensor is delivered as standard with its own calibration certificate traceable to national standards. |
| Enhanced Load Sensor ELS 100 N, thread 10/32 UNF |
| Enhanced Load SensorELS-S 1000 N, thread M10 |
| Enhanced Load Sensor ELS 10 N, thread 10/32 UNF |
| Enhanced Load SensorELS-S 1000 N, thread M6 |
Liên hệ Mecmesin tại Vietnam | Hoa Ý Co Ltd | Mr. Việt | Tel. 0986-817-366
Không có nhận xét nào:
Đăng nhận xét