Máy đồng hóa Silverson homogenizer

Silverson Mixer Homogenizers

Silverson Mixer Homogenizers are fast and efficient and are capable of producing a fine droplet or particle size, typically in the range of 2 – 5 microns. This degree of homogenization is suitable for the vast majority of products, such as creams and ointments, lotions, sauces and flavor emulsions.

Silverson offers a range of in-tank and In-Line mixer homogenizers for these applications. The precision-machined Silverson workhead generates exceptionally high shear rates in a three stage process that rapidly homogenizes the product to the required uniformity.

For the few applications that demand submicron particle or globule sizes a high-pressure homogenizer may be required. Where this is the case, passing the product through a high shear Silverson Mixer Homogenizer first will dramatically improve throughput, process efficiency and reduce operating costs. This is because a high-pressure homogenizer works better when fed with a premix of uniform and fine globule or particle size, allowing the product to pass through the homogenizer at a much faster rate, normally in a single pass.

https://www.silverson.com/us/products/homogenizers/

Silverson Vietnam (Hoa Y Co Ltd)

Mr. Việt | 0986 817 366

Flashmix Powder/Liquid Mixers

The Silverson Flashmix takes a revolutionary approach to powder/liquid mixing. Unlike many powder/liquid mixers, which use vacuum to pull in powders, the Flashmix literally forces powder into the liquid stream. This not only allows it to disperse and hydrate large volumes of powders, it means it can be used at higher temperatures and with higher viscosity mixes - offering the advantages of high shear mixing to a wide range of applications that were previously not possible.

Advantages

• Fast powder incorporation rates of up to 500 lbs/min
• Agglomerate-free, consistent product, time after time
• Suitable for operation at higher temperature
• Suitable for higher concentrations of gums and thickeners
• Minimum aeration
• Sanitary - the Flashmix is based on an EHEDG and 3-A Certified hygienic mixer
• Modular construction with a range of options to suit a wide range of applications and batch sizes
• Low power requirement; no additional pump required
• Low level, ergonomic design
• Simple - the Flashmix is easy to install, easy to operate and easy to clean

Materials of Construction

All product contact parts are in 316L stainless steel. The chassis is constructed from 304 stainless steel.

Motor Specifications

TEFC (Totally Enclosed Fan-Cooled) motors are available as standard. Other types of motor and enclosures are available as options.

Inlet and outlet connections

Tri-clamp fittings are standard. Other fittings on request.

Sealing

Sanitary single mechanical shaft sealing is standard. Double mechanical shaft seals are available.

Valves

Manual butterfly valves are standard. 

Cleaning

Designed for Cleaning-In-Place (CIP).

Hopper

Various hoppers are available according to model and application, including profiled hopper for minimal aeration.

Sack Table

A stainless steel sack table is available for FMX25 and 50.

Automation

As an optional extra the Flashmix can be supplied with pneumatic valves coupled to a powder sensor for semi-automatic processes.

FMX25

Capable of incorporating powders at rates of up to 40 lbs/min, the FMX25 is available with a 1.4 cu ft hopper as standard.

FMX50

The FMX50 can be supplied with a 1.4, 3.5 or 10.6 cu ft hopper, profiled for minimal aeration. Powder incorporation rates of up to 130 lbs/min are achievable.

FMX75

For bulk powder dispersion, the powerful FMX75 can incorporate powders at rates of up to 500 lbs/min. Available with a profiled 10.6 cu ft hopper.

Sack Table

A stainless steel sack table is available as an optional extra for models FMX25 & FMX50

FMX-CD

Designed for aggressive chemical service, the FMX-CD is generally configured to suit specific customer requirements. Double mechanical shaft seals and flange fittings are standard. Elastomers, valve and motor type can be specified to suit the application.

Silverson Vietnam

Mr. Viet 

0986817366

Inline mixer Silverson / Bơm nhũ hóa công nghiệp

High Shear In-Line Mixers

Silverson High Shear In-Line mixers are supremely efficient and rapid in operation and are capable of reducing mixing times by up to 90%. The action of any Silverson In-Line mixer can be modified with the use of rapidly interchangeable workheads. This enables any machine to mix, emulsify, homogenize, solubilize, suspend, disperse and disintegrate solids.

Features:

• Aeration free
• Self-pumping
• No bypassing
• Interchangeable workheads
• Sanitary construction
• Easy maintenance
• Lower power requirements
• Eliminates agglomerates and fish eyes
• Creates stable emulsions and suspensions
• Reduces particle size
• Rapidly dissolves solids
• Accelerates reactions

Capacity

Self-pumping throughputs of 5 to 50,000 gallons/hr.

No Bypassing

Product cannot bypass the precision rotor/stator workhead.

Interchangeable Workheads

Single stage rotor/stator configurations as standard. For those applications that require greater shear, interchangeable multistage configurations can be used.

Materials of Construction

Product contact parts in 316L stainless steel. Special materials available on request.

Motor Specification

TEFC (Total Enclosed Fan Cooled), washdown duty and explosion proof motors are available as standard. Inverted rated, stainless steel and other motors are available as optional extras.

Inlet and Outlet Connections

All sanitary or flange fittings available upon request (i.e. Tri-Clamp, ASA, DIN, etc). All Silverson In-Line Mixers are designed for cleaning-in-place (CIP and SIP).

Liên hệ Silverson Vietnam / Mr Viet (0986817366)

Silverson Batch Mixer Máy khuấy trộn công nghiệp

HSX: Silverson UK
Model BX



Khả năng khuấy cho mẻ 220 Lít
Vật liệu inox 316L
Tốc độ khuấy 3000 rpm
Motor TTEFV hoặc motor chống cháy nổ theo yêu cầu
Motor làm từ inox toàn bộ hoặc sơn màu xanh theo hãng Silverson


Cố định máy khuấy trên nắp bồn hoặc dùng giá treo
Đầu khuấy nhũ hóa/đồng hóa kiểu rotor/stator
Có nhiều đầu khuấy:

General Purpose Disintegrating Head

Khuấy trộn gum, chất làm đặc/gel, xanthan gum, hỗn dịch,...

Slotted Disintegrating Head

Dùng khuấy thực vật, động vật như thịt, polymer, cao su,...

Square Hole High Shear ScreenTM

Nhũ hóa hệ nhũ rắn/lỏng

Standard Emulsor Head and Emulsor Screen

Nhũ hóa lòng/lỏng

Máy khuấy Abramix khuấy dung dịch gốm sứ, chất xúc tác,....

Đầu khuấy Duplex cắt nhỏ polymer dùng trong công nghiệp sản xuất dầu nhờn

Chi tiết vui lòng liên hệ:

Mr. Việt Silverson (0986-817-366)

AX5 Máy khuấy nhũ hóa 70 lít Silverson

HSX: Silverson Anh Quốc
Model: AX5



Tốc độ khuấy: 6000 vòng/phút
Vật liệu inox 316L
Nâng hạ chỉnh điện tự động
Khuấy 10-70 Lít
Ứng dụng: Mỹ phẩm, Thực Phẩm, Dược phẩm, Hóa Chất. Hóa Dầu
Tích hợp Data Logger ghi nhận dữ liệu
Nguồn điện: 230V 50Hz

Chi tiết liên hệ: Mr. Việt 0986817366

MÁY THỬ LỰC NÉN THÙNG CARTON MULTITEST-50I

HSX: MECMESIN ANH QUỐC
MODEL: MULTITEST-50i





Hệ hai cột song song, thiết kế dùng thử lực kéo lực nén
từ 2N đến 50kN

Các loại loadcell thông minh, bộ tín hiệu ghi nhận giá trị lực
Loadcell ILC (2-500N)
Loadcell ILC-S (100-5000N)
ILC-T (10-25kN)
ILC-P (25-50kN)

Phân tích & lưu trữ dữ liệu phân tích trên phần mềm Emperor TM


Thông số kỹ thuật:

- Khoảng trống giữa 2 trụ là 420 mm
- Khoảng di chuyển crosshead là 1100mm
- Khối lượng: 140kg
- Kích thước: H1931 x W864 x D572 mm
- Tốc độ di chuyển: 1-400 mm/phút, 0.2% chính xác
- Độ phân giải: 1mm/phút
- Khả năng thử lực:
+ Chính xác: 0.1%
+ Độ phân giải: 1:6500
+ Đơn vị: mN, N, daN, kN, gf, kgf, ...
+ Xử lý mẫu: 2000Hz
+ Tốc độ ghi dữ liệu: 1000Hz, 500Hz, 100Hz, 50Hz, 10Hz,
- Nguồn điện: 230V 50Hz

Chi tiết vui lòng liên hệ:
Mr. Việt | 0986 81 73 66
viet.hoay@gmail.com

Máy chuẩn độ xác định FFA Eco Titrator Oil

Order number: 2.1008.3010

The compact Eco Titrator with integrated magnetic stirrer and touch-sensitive User Interface is ideal for routine analysis. It provides GLP-compliant results with minimum space requirements at all times.

The Eco Titrator Oil offers you the complete package for the determination of the acid or base number in petrochemical products. Included in the package are titrators and a 20 mL cylinder unit as well as a Solvotrode EasyClean, a robust, combined pH electrode specially developed for nonaqueous acid-base titration.

Contact Mr. Viet Hoa Ý Co Ltd | 0986 81 73 66