Xuất xứ: Anh Quốc
Model: FPT-H1
HỆ SỐ MA SÁT CHO BAO BÌ
Designed for manufacturers, converters, printers and end-users of film and sheet materials, FPT-H1 is pre-programmed to perform static and dynamic coefficients of friction tests on a variety of materials. The main international test standards are included:
- BS EN ISO 8295 and ASTM D1894: plastics, film and sheeting
- ISO 15359 (first and third slide) and TAPPI T 549: paper and board
The FPT-H1 can be specified with the ISO 15359 COF kit, which provides a mechanised placement and lift of the 800 g sled, as required by the standard. The fixture also ensures a linear slide during the dynamic slip phase by means of its friction-free guide rails.
LỰC BÁM DÍNH
Designed for the packaging, wrapping and laminating market, FPT-H1 may also be fixtured to become a convenient push-button horizontal peel tester. Amongst the 90°, 180° and T-peel standards supported are: FINAT 1,2 and 3, AFERA 5001, ASTM D3330, ASTM D6252, ASTM F88, BS EN 868-5, BS EN 1895, BS EN 1939, ISO 8510-2 Part 2, PSTC 101.
The driven moving table fixture used for 90° peel and adhesion testing ensures a consistent right angle between the peel direction and the substrate, and accepts float glass and stainless steel sample plates.
LỰC XÉ
Designed for the plastic film, paper and textile industries, FPT-H1 assesses packaging material strength, welded joins, folds, creases and perforation lines for tear resistance. The following standards may be addressed: ASTM 1004, ASTM D1938-08, BS EN ISO 6383-1, BS EN ISO 12625. Quick-change grips can easily be fitted to perform single-rip ‘trouser’ tear tests, trapezoidal and wing (Winkelmann/Graves) style tests.
THÔNG SỐ KỸ THUẬT
- Loadcells of 10 N and 100 N
- Load accuracy 0.1% of full scale
- Load resolution 0.004 N to 0.04 N
- Speed range 1.0 - 1200 mm/min, continuously variable
- Crosshead height adjustment 30 mm
- Max. crosshead travel 275 mm
- Test plate surface, stainless steel 304
- Weight 29.3 kg (64.6 lb), without console: 25.6 kg (56.4 lb)
ỨNG DỤNG & PHỤ TÙNG
- 200 g Coefficient of friction sleds, neoprene- and foam-faced
- ISO 15359 COF kit: 800 g sled (neoprene-faced), mechanised sled lift/set down, and sled guide rails
- Heated platen for friction at elevated temperatures
- 90°, 180° and T-peel peel fixtures
- Float glass and stainless steel sample plates
- Small vice grips for non-adhesive peel, and tear testing
- Calibration verification kit
Chi tiết vui lòng liên hệ:
CTY TNHH HOA Ý
Hotline: 0986817366
Mr. Quốc Việt
eMail: quocviet@hoay.com.vn
Chân thành cám ơn!
Không có nhận xét nào:
Đăng nhận xét